Contact
EN · USD
Sign In 0 0 0

Custom Epoxy Dome Stickers: Resin-Domed Logo Labels Specified for Real-World Use: Video Guide

This 74-second video covers what to specify, check and approve before production.

View product detailsRequest a quote

Video transcript

  1. 0:00Want dome labels that still look right months later?
  2. 0:05It's a printed, die-cut label whose clear resin lens stops at the cut edge. 'Epoxy dome' can cover several resins that look alike when fresh. Get yours named in writing.
  3. 0:17Flat, indoor, short-life parts can use epoxy. For daylight, heat, curves or long life, sample aliphatic polyurethane first. Epoxy can yellow for good.
  4. 0:28Design for the lens. Its rim bends whatever sits beneath, so keep fine text and serials in the flat centre, and round sharp corners.
  5. 0:38Approve a sample on your real materials. A fingernail mark fading within a dozen or so seconds points to polyurethane. Agree the checks, and that approved sample becomes the reference.
  6. 0:50Here's a look inside our factory. Resin is dropped onto each printed label, nozzle bars work across full sheets, the resin spreads into clear domes, giving finished domed labels like these.
  7. 1:04Send vector artwork and a photo of the target surface,
  8. 1:09plus your use, size and quantity.

More product videos