Contact
EN · USD
Sign In 0 0 0

Puffy Sticker Care After Delivery: Surfaces, Application, Storage and Shelf Life (Video)

This 60-second video sums up the buying guide. The full article covers the details and sources.

Read the full articleView product detailsRequest a quote

Video transcript

  1. 0:00Sheets arrive fine. Weeks later, corners lift, domes stay dented.
  2. 0:05Handling problems, not print defects. Three things keep changing: dome recovery, adhesive bond, and lamination at the cut edge. Weight, heat, cold and sharp bends wear them down.
  3. 0:17Inspect early: sample top, middle and bottom sheets, press three domes, peel five, and check three on real packaging at 24 and 72 hours.
  4. 0:28Apply at room temperature to clean, dry surfaces. Peel low from one corner, hinge it down, press the edge, not the dome, then allow about 24 hours.
  5. 0:40Store flat, in low stacks, cool, dry and dark. The adhesive usually sets shelf life, so log it by lot and use first-in, first-out.
  6. 0:50Planning a run? Include your substrate and storage conditions,
  7. 0:55so we match face film, core and adhesive to real use.

More product videos